|
Project Gallery
This is a gallery of just a few of the more notable ships we have worked with. Please refer to our facebook page for the project updates.
Launch Gallery Now!
Sailaway VI
- A 17m FRP Sailing Charter Catamaran.
- Performs Design & Stability Approval for Class 1D operations.
Sunlover Platform 1
- A 45m Steel / Aluminium Pontoon Platform
- Performs Design approval on new Sundeck w/ slides.
- Performs Stability approval for Class 1E operations
Nautilus Heli-pontoon II
- A 13m Steel Helicopter Pontoon
- Performs Design & Stability Approval for Class 2D operations.
MY Mystic Tide
- A 26m FRP Motor Luxury Yacht
- Performs design approval for the whole ship excluding electrical.
- Performs stability approval for Class 2B operations.
SY Liquid Desire
- A 15m FRP Sailing Catamaran
- Performs design approval for the whole ship excluding electrical.
- Performs stability approval for Class 2C &1E operations.
Sea Walker II
- Performs mooring design assessment on their day and night moorings for GBRMPA requirements.
Bargarse
- A 7.0m Aluminium punt type workboat.
- Performs full design & stability assessment for commercial registration under Queensland Transport.
- Design its long-line mooring for Pearl aquaculture in Albany Passage where this workboat will be use.
Krammer
- A 24.0m Steel Barge Dredging Booster Station
- Performs a lightship check and stability proof test for its deck crane inside
- Supply of stability booklet for Bureau Veritas approval.
James Pearce
- A 23.0m Steel Crane Barge
- Performs a lightship check and stability proof test for its deck crane
- Supply of stability booklet for commercial registration under Queensland Transport.
Van Heck
- 5 in nos. of a 12.0m Steel Barge combined and connected together to 15.0m in length
- Performs a stability assessment for this special operation in dredging carrying 58 tonnes of deck load.
- Supply a stability assessment report to the operator.
Silverado
- A 24.0m Aluminium Motor Yacht Catamaran
- Performs a lightship check and stability assessment
- Supply of stability book supplement to its existing stability data for Certificate of Survey requirement.
MV Ocean Freedom
- A 20m Aluminium Luxury Passenger Catamaran Cruiser
- Performs full design on hull modification / extension & machinery for change in jet unit propulsion into a propeller unit
- Performs compliance survey of the construction
- Performs Turning Radius & Inclining Experiment to produce Trim & Stability Book under HSC Code
Mingloo Tender
- A 6m Aluminium Rigid Inflatable Boat (RIB)
- Performs full hull design & compliance survey of the construction
- Performs positive floatation or swamp test for stability
Daintree River Ferry (DRF)
- A 45m Steel Cable Car / Passenger Ferry
- Performs full hull design contract including machinery & propulsion
- Performs compliance survey of the construction
- Performs Loadline survey
- Produced Trim & Stability Book
MY Hillsy
- A 28m FRP Motor Luxury Yacht
- Performs design assessment & drawing plan services
- Performs Inclining Experiment for Trim & Stability Book
MV Blue Thunder II
- A 16.5m Aluminium passenger ship
- Performs full design on wheelhouse top extension, awning & hull aft extension
- Performs compliance survey of the construction
- Perform Inclining experiment to produced Trim & Stability Book
Heli-pontoon
- A 12.0m Steel helipad pontoon
- Performs full design including the timber decking
- Performs compliance survey of the construction
- Produced Stability Book
Trail Sailer
- A 9m Timber & FRP trail sailing boat
- Performs hull form development & produced hull offsets including design drawings to produced good
lofting & timber cutting
Jodava
- A 12.6m Steel fishing ship
- Performs design of an aluminium wheelhouse & the steel aft deck extension to fit the new wheelhouse
- Performs compliance survey of the construction
- Perform Inclining experiment to produced Trim & Stability Book
MY Antipodean
- A 34m Aluminium Motor Yacht
- Performs refit design on crane well & base to fit new upgraded deck crane.
- Performs lightship check to amend stability changes.
MY Seafaris
- A 39.0m Aluminium Catamaran Motor Yacht
- Produce a stability book supplement covering the additional class survey requirements.
- Performs a safety equipment inspection for certificate of survey application.
Stacey Lee
- A 20m Steel Trawler
- Performs stability data amendments due to fitting of Prawn hopper.
Kimissa Lee
- An 18m Steel Trawler
- Performs design on the fuel deep tank to serve as part ballast tank after the ship capsize.
- Performs design on the keel bar for stability compliance.
- Performs full stability test, including lifting hull offsets to produce a stability data due to fitting of Prawn hopper and the further building.
Sunlover Heli-pontoon
- A 19.0m Steel Heli-pontoon
- Perform full Design & Stability assessment & documentation for commercial registration under Queensland Transport.
Atlas A-frame
- Performs design assessment and documentation to the existing A – frame under Lloyds Code for Lifting Appliances in a marine environment for Qld. commercial ship registration & survey requirements.
|
PO Box 117, Manunda
Cairns, Qld. 4870
Australia
Mobile: +61 416576997
Tel / Fax: +61 7 4230 0784
admin@misshipdesign.com
|